This is a jig I made tonight to be able to safely and accurately slot the ends of some long vertical pieces. I had no other way to hold them safely. This could be a tenon jig too. I was given a big cast iron tenon jig but it did not fit my tablesaw so I gave it back. This was made along those lines only I used maple plywood for the bulk to clamp to.It is made from 1/2” and 5/8” maple plywood and doweled and screwed and glued together. It is 4” wide x 8” long and 6” high with a vertical rail to insure the piece is held square. I left a 1/4” lip on the bottom for the piece to sit on so the edge is never dragged across the top of the saw. It rides totally on the jig like a sled!The only finish on it is wax on the bottom and side. It worked good to put the 1/4” slots in the pieces of the next project. It held the parts real well and I felt comfortable using it that way.Cheers, Jim
These are the cabinets along the south wall I made. Silverware drawer, measuring cups/towels/hot pad holders. and a pull out drawer with utensils upright. Love the utensils not all jumbled in a drawer together. Pull out drawers for lids and dishes, and a final slim cabinet with sheets/pans, etc.
I just finished another high track dozer. The tracks are Mahogany and the main body is Kauri, the cab and other dark timber is Walnut. The model has been coated in tung oil. This is a T & J model but I made the tracks a little different, the gripper is approx 1/16” wide mounted vertically and housed into the track link. I also added 4×3/32 dowels to each link as bolts. Making the tracks this way is very time consuming but in my opinion it is well worth the extra effort.